CUET Engineering Graphic Syllabus , Easy Tips To Prepare

Table Of Content 

Engineering Graphics Syllabus for CUET in 2022

Seven sections make up the CUET Engineering Graphics course. Various sub-sections roughly correspond in importance to each of these seven parts throughout the text. Each unit has some sort of connection to the others. The student should completely and effectively study each of these subjects. The applicant should devote the same amount of time and effort to each of these areas.
Find below the links for the PDFs of different subjects for CBSE Class 12 Syllabus Term-2 2022-
 

CUET English Syllabus	CBSE 12th English Syllabus 2022 (Term 2) PDF Download
CUET Chemistry Syllabus	CBSE Class 12 Chemistry Syllabus Term-2: PDF Download
CUET Maths  Syllabus	CBSE 12th Maths Syllabus Term-2: PDF Download
CUET Physical Syllabus	CBSE Class 12 Physics Syllabus Term-2: PDF Download
CUET Biology Syllabus	CBSE 12th Biology Syllabus Term-2: PDF Download

 

Engineering Graphics Syllabus for CUET 2022, Unit-Wise

Unit	Topic
Unit-1: Isometric Projection of Solids	Construction of isometric scale showing main divisions of 10mm and smaller divisions of 1mm, also showing the leading angles. Isometric projection (drawn to isometric scale) of solids such as cube; regular prisms and pyramids (triangular, square, pentagonal, and hexagonal); cone; cylinder; sphere; hemisphere; keeping the base side of the solid parallel or perpendicular to HP/VP. The axis of the solid should be either perpendicular to HP / VP or parallel to HP and VP.
Unit 2: Drawing to full-size scale with instruments.	Combination of any two above-mentioned solids keeping the base side parallel or perpendicular to HP/VP and placed centrally together (Axis of both the solids should not be given parallel to HP).
Unit-3: Machine Drawing (Machine Parts)	Drawing to full-size scale with instruments. Introduction of threads: Standard profiles of screw threads - Square, Knuckle, B.S.W., Metric (external and internal); Bolts – Squarehead, Hexagonal head; Nuts – Squarehead, Hexagonal head; Plain washer; a combination of nut and bolt with or without a washer for assembling two parts.
Unit 4: Free-hand sketches	Free-hand sketches Conventional representation of external and internal threads; Types of studs – Plain stud, Square-neck stud, Collar stud; Types of rivets – Snap head, Flathead, Pan head (without tapered neck), 600 Counter Sunk Flathead.
Unit-5: Bearings	(i) Open-Bearing (ii) Bush-Bearing
Unit-6: Rod Joint	(i) Cotter-joints for round rods (Sleeve and cotter joint) (ii) Cotter-joints for square rods (Gib and cotter-joint)
Unit 7: Tie-rod and Pipe-joint	(i) Turnbuckle (ii) Flange pipe joints are to be shown.

How Do I Get Ready for the CUET Engineering Graphics Syllabus?

• Create a plan for preparation and follow it. Before starting your exam preparation, make a study plan. Candidates need to prioritize each subject and allot appropriate time for it. To make the preparations manageable, they must set specific targets.
• complete and accurate analysis examination syllabus Candidates taking the entrance test must be familiar with the whole CUET Engineering Graphics course.
• nonetheless, in the proper way. A lot of practise is necessary to achieve a high CUET test score. Candidates must finish as many question papers, mock exams, and sample papers from prior years as they can.
• Revision is the secret to long-term success. Extensive review is required for exam preparation. Candidates have to spend at least two weeks for revision.

Recommended Readings for the CUET Engineering Graphics Syllabus

Best Books for CUET Engineering Graphics
Engineering Graphics Class 12	NVP Kumar
Engineering Graphics	Sankar Prasad Dey
A Textbook to Engineering Graphics	K. Venugopal

  Engineering graphics includes the fundamental drawing methods used in engineering, including Lines & Lettering, Geometrical Constructions, Principles of Tangency, Orthographic Projections, Sectional Views, and Dimensioning.